Non-Invasive Blood Pressure (NIBP) – Patented Colin Technology

Measurement technology Oscillometric method

Measurement method Linear deflation method

Pressure display range 10 to 300mmHg

Pressure display accuracy Less than ±3mmHg

NIBP Measurement range

Adult/pediatric mode

 SYS 60 to 250mmHg

 MAP 45 to 235mmHg

 DIA 40 to 200mmHg

 Pulse rate 40 to 200bpm

Neonatal mode

 SYS 40 to 120mmHg

 MAP 30 to 100mmHg

 DIA 20 to 90mmHg

Pulse rate 40 to 240bpm

NIBP accuracy AAMI SP-10:2002+A1:2003

Pulse rate accuracy ±2% or ±2 beats

ECG (Electrocardiogram)

Leads 3/5 Lead

Lead I, II, III, aVR, aVL, aVF, V (Chest Lead)

Heart Rate

Measurement Range 20 to 250bpm

Accuracy ±3bpm or ±5% (whichever is greater)

Respiration (im RR)

Measurement method Trans-thoracic impedance

Leads RA to LA

Range 0, 3 to 120breaths/min

Accuracy ±3 breaths/min

SpO2 (Pulse oximeter)

Measurement method 2 wave length pulse wave type

Range 1 to 100% SpO2

Accuracy Adult/pediatric (When using SpO2 Disposable Sensor MAX-A) 70 to 100% SpO2 ±2 digits, 1 to 69% SpO2 unspecified

Pulse Rate Range 20 to 250bpm

Pulse Rate Accuracy ±3bpm

Display update Less than 30 sec

Temperature Measurement (Option)

Measurement method Thermistor

Probe Type Thermistor probe YSI 400 series (2 channels) (Probes not included)

Range 15 to 45°C (59 to 113°F)

Display Accuracy ±0.1°C (25 to 45°C) (77 to 113°F) ±0.2°C (15 to less than 25°C) (59 to less than 77°F)

Probe Accuracy ±0.1°C (±0.18°F)

IBP (Option)

Measurement Method: Pressure Transducer Method

Pressure Measurement Range – -50 to +300mmHG

Pulse Rate Measurement Range – 20 to 250bpm

Display Accuracy – ±3mmHG

Standard – IEC60601-2-34:2000

CO2 (Option)

Measurement method Non-dispersive Infrared Spectroscopy

Range 0-100mmHg : 0-13.3kpa : 0-10%CO2

Accuracy ±2mmHg or ±4% (whichever is greater)

Respiration (awRR) Range 0 to 120 breaths/min

Respiration (awRR) Accuracy ±1 breath/min

Recorder (Option)

Type Thermal

Weight 150g (0.33lbs)

Resolution 8 dot/mm

Number of channels 1 to 2 channels

Paper Type Thermal

Paper Width 50mm (2in)

Paper Speeds 25.0mm/sec and 50.0mm/sec (1in/sec and 2in/sec)

General

Dimensions 360(W) x 215(D) x 280(H)mm (14.2 x 8.5 x 11in)

Weight 5.5kg (12.1lbs) (excluding optional configurations and accessories)

Display – Screen Size 26.4cm (10.4in) measured diagonally, Screen Type/Color Liquid Crystal Display (LCD) color, Resolution 800 x 600 pixels

Number of traces 4 or 6 waveforms

Safety Standard IEC60601-1:1988+A1:1991+A2:1995

Degree of protection (enclosures) IP21

Type of protection Type CF – Applied part

Power Requirement

AC Power 100-240V~50/60Hz, 0.5-1.3A

Battery Ni-MH, 12V/3.8Ah (1 included)

Environmental

Operating Temperature 10 to 40°C (50 to 104°F)

Storage Temperature -20 to 60°C (-4 to 140°F)

Operating Humidity 15 to 90% RH, non-condensing

Accessories

Most models: Reusable adult cuff, adult 3.5m cuff hose, ECG cable,

ECG 3-lead wires, SpO2 Durasensor® DS-100A, SpO2 extension cable

DOC-10, operation manual, power cord, rechargeable battery (1).

Available with: CO2 sampling set, printer paper, ECG 5-lead wires,

temperature probes, rolling stand, and a full size range of reusable and

disposable BP cuffs